Lego Minifigure Bald Head/Hat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lego Minifigure Bald Head/Hat: A fun accessory for Lego Minifigures. Its not a perfect design but it was close enough.…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 1219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- People
- Licencja
- Creative Commons — Attribution
Lego Minifigure Bald Head/Hat:
A fun accessory for Lego Minifigures. Its not a perfect design but it was close enough. I highly recommend using a well tuned 3D Printer and Prusaslicer to slice this file - see screenshots for the preferences I used.
Once support material has been removed, press hard on the attatchment and it should simply clip onto the head of a Lego Minifigure.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Infill:
10
Filament:
Prusament PLA
White/Clear
Notes:
Printed with 0.4mm nozzle using Prusaslicer (system preset - '0.10mm DETAIL' with 'support on build plate only', 'vertical shells perimeter' at 1 and 'detect thin walls' enabled).
Support material is difficult to remove so leaving a small clearance gap between the inner perimeter and the actual support material will make it easier to remove during post-processing.Category: People