Elektron Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prop up your Elektron Digitakt, Digitone and Syntakt at a nice working angle.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 1289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
This simple stand will hold your Elektron Digitakt, Digitone or Syntakt at a much more comfortable angle (13°) than flat on your desk. Includes the Elektron logo on the back edge. This is narrow enough to fit between the feet on the Elektron itself.
It includes detents for rubber feet which will prevent everything from sliding around. I used the square ones from this set: https://www.amazon.com/AUSTOR-Pieces-Black-Rubber-Bumper/dp/B07CNQC695
This print will work fine with as little as 5% infill, but it ends up being so light that it feels flimsy and cheap. I went with 25% infill to give it a little more weight.