SkrPi Electronics Case for 3D Print Enclosures
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The SkrPi is an electronics enclosure that is designed to be mounted under an enclosure and still give access to usb and
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The SkrPi is an electronics enclosure that is designed to be mounted under an enclosure and still give access to usb and sd on both mainboard and the pi.
The hole patter fits skr mini boards and original creality ender boards where an skr is a drop in replacement.
This Pi mount was designed for the pi 3b+. However, the screw pattern for a pi 4 is the same. Just keep in mind that the IO on a pi 4 is different and you may need to alter the front ports if you need pi 4 support.
Fan mount fits a 4010 fan so stock ender fan will do fine.
Horizontal fan mount reduces case height which decreases footprint, print time and reduces the volume of air that needs to be moved.
Enclosure mounting holes are 3mm with up to 6mm bolt head clearance.
V1.2 adds m3 nut holders in fan shroud, more room to run usb power, stackable buck converter tray (stack with bolts) and room for 16mm power button.
Enjoy!