Spiky Crown
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spiky crown made for a costume project. Creating something like this with solid modeling isn't ideal... Overall…
- Ocena
- 4,667 / 5
- Polubienia
- 448
- Pobrania
- 1497
- Wydruki
- 3
- Wyświetlenia
- 6423
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A spiky crown made for a costume project. Creating something like this with solid modeling isn't ideal...
Overall dimensions:
Diameter: 140mm (5.5")
Front spike height: 160mm (6.25")
Other spikes height: 110mm (4.24")
Instructions
If you want to print with support, I've provided the full model. Depending on the size you want the the printer you have you can either print the separate pieces or print as the top half and add the bottom spikes onto it. Keep in mind the size is smallish, so it may need to be resized for larger heads.
For large printers print:
1XCrown1-TopHalf
1XCrown1-FrontBottom
4XCrown1-Bottoms
For Smaller printers (Sized for Thing-O-Matics) Print:
1XCrown1-Front
1XCrown1-Left
1XCrown1-Right
2XCrown1-Back (Can be printed 2 at a time in an array)
1XCrown1-Topper
1XCrown1-FrontBottom
4XCrown1-Bottoms (Can be printed 4 at a time in an array)
All the pieces are tabbed so they'll fit together when printed. When we assembled it, we glued everything together using acetone.
Category: Costume