Star Wars Legion laser cut MDF shield barrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It occurred to me today that I could mix laser cutting and 3d printing to end up with a more unique looking wargaming…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 493
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
It occurred to me today that I could mix laser cutting and 3d printing to end up with a more unique looking wargaming barrier in anticipation of Star Wars Legion. These are designed so that you could cut the entire thing out of MDF, or print the shield itself in plastic with 1 or 2 top/bottom shells, low infill, and hex infill pattern with a translucent filament.
Wee chopper and other greebles came from https://www.thingiverse.com/thing:2507678
Print Settings
Printer:
K40 Laser, Tevo Tornado
Notes:
This was cut in 3mm baltic birch but is meant for MDF. The plastic part is printed in atomic PETG with 3 perimeter, 2 top and bottom layers, and hex infill.
Category: Games