3D printable Kokanee Dodger mold and lure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
https://www.youtube.com/watch?v=M6H6DE8YYtI&t=5s Added how to bend video Kokanee dodgers are $10 or more for a very…
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 653
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Added how to bend video
Kokanee dodgers are $10 or more for a very basic shaped piece of tin or brass with a sticker attached. This is a 3 part system meant to make your own for pennies on the dollar with unlimited customization options.
Print Settings
Printer Brand:
SeeMeCNC
Printer:
Rostock MAX
Rafts:
No
Supports:
No
Resolution:
whatever
Infill:
50% for mold, 100% for dodger
Notes:
Print the mold twice in something like PETG or ABS and the main part in PLA. In the photos above, I've printedthe mold in PETG and the dodger in glow in the dark PLA. Using boiling or near-boiling water, a butane torch, a heated bed, or another heat source, bring the dodger main part up to plasticity. Place it between the two interlocking mold pieces and smash a lot. Apply stickers and epoxy resin as desired. If you use it inline and catch a koke post a comment please.
Category: Sport & Outdoors