BLS Forza SMA pigtail mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pigtail mount for the BLS Forza racing frame.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 409
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pigtail mount for the BLS Forza racing frame. This one is maybe a bit stronger than the original because it doesn't match the shape of the top plate. Also easier to print and without supports!
I printed with the "face" having the screw holes on the bed, and the holes for the standoffs hanging at 45 degrees, just like the file preview on the viewer.
TIP: to easily slide the pigtail inside without removing it from your vTX, you can slice the print at the location shown on the second picture with some snips, then slide the wire part of your pigtail in, so you can put the screws from the back.