GET a PAIR Honda Ruckus PAIR valve blockoff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a PAIR valve blockoff cap for the Honda Ruckus. The PAIR valve normally takes atmospheric air in once the…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 410
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a PAIR valve blockoff cap for the Honda Ruckus. The PAIR valve normally takes atmospheric air in once the exhaust valve closes to mix into the exhaust gasses that then pass through the muffler, etc. It's normally blocked off once carburator modifications are done.
Print Settings
Printer Brand:
RepRap
Printer:
Kossel Clear
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
any
Infill:
any
Notes:
This is more of a publishing of a CC attributed licensed solid part than something I think is appropriate to 3d print. 3d printing was and should be used in prototype and sizing for the part, but it's more appropriate to make the final part in a metal of some sort. I printed my prototype out in hatchbox green ABS at 20% infill to make sure the size was good. The final part was milled out of 6061-T6 aluminum plate on a Shapeoko 3.
How I Designed This
Sketchup with custom solids toolchain
Category: Automotive