Honda Ruckus battery box geometric plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I replaced my Ruckus headlights with an LED bar and wanted the front end to be a little less bare than the plain…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 750
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I replaced my Ruckus headlights with an LED bar and wanted the front end to be a little less bare than the plain battery box. This part fits between the headlight mount holes perfectly and looks like something or other, I dunno. I just wanted to remove some unused space.
Instructions
I printed in ABS at 20% infill and treated the finished product with a layer or two of bondo spot putty. Primed then painted with krylon textured. I spaced it one m5 flat washer's width so the paint couldn't bond to the battery box (Its ABS as well, BTW).
Category: Automotive