Pet playpen gate screw cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement screw cap for the In The Zone Convertible Plastic Pet Gate & Play Pen found at Petco.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
Through relatively normal use, the nut retaining cylinder on one of the screw caps for this gate broke, resulting in inability hold a joint together. So, I created a replacement.
I used the existing 12mm nut from the broken handle, and used JB-Weld to hold it in to the new part.
As is, the fit is extremely snug and in my case required minor sanding to get it to fit, but otherwise it is fully functional.
In the included picture, the 3d printed part is on the left, original on the right. Printed on Mini+ with 80% infill using .15mm Quality setting in Prusa slicer.