Updated Prop Assembly For Birds Scarer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated propeller, and prop assembly.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 1112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
The Bird Scare seemed like a fun project. However I hit a wall with the type of materials I was using (PTEG) and the configurations I was using to actually print a viable prop assembly. I modified the prop assembly so that the slots are 90 degrees and updated the prop to incorporate a 45 degree twist. I believe it works as well as the original, just a little easier for me to print.
I used several parts form the remix, but I also used portions of a similar model found here: https://www.thingiverse.com/thing:950635
Also check out the swivel base I designed later on, you can also see one with and one without the base in the pictures. https://www.printables.com/model/231706-bird-scatter-swivel-base