Apple Pencil Charger and Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've used a few Apple Pencil stands/chargers in the past, but none of them have pleased me 100%. This one is a charger…
- Ocena
- 4 / 5
- Polubienia
- 3
- Pobrania
- 65
- Wydruki
- 2
- Wyświetlenia
- 421
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I've used a few Apple Pencil stands/chargers in the past, but none of them have pleased me 100%.
This one is a charger and stand at the same time and has room for the Pencil cap when charging. I have two versions, a normal version and one in which the pencil and the cap sit a bit looser. It fits the standard charging adapter from Apple and the original Apple charging cable in the cavity (also small 3rd provider cables are possible).
The stand does not need much stability, so you can choose the infill according to your taste (not 0%).
On my Ender 3 v2, the stand needs only 2 hours with a layer height of 0.12mm. You can also print with a higher layer height but the quality of the print suffered.
I used the PrusaSlicer 2.3.0 with Supports activated for an optimal print result. Theoretically, the print is also possible without supports, that depends on your cooling.
Have fun printing!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.20
Infill:
25
Filament: Janbex PLA Black
Category: Office