Jedi Holocron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here are the files for my Jedi Holocron Model. WILL YOU CHOOSE THE WAY OF THE LIGHT
- Ocena
- 5 / 5
- Polubienia
- 119
- Pobrania
- 223
- Wydruki
- 3
- Wyświetlenia
- 1519
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Standard Digital File License
Here are the files for my Jedi Holocron.
I would suggest printing the parts lay flat on the bed with supports (you will only get a little under the dovetails.
I printed mine in transparent PETG to let light pass through, then colour change for the details.
you then assemble by
- Slide the sides onto the back panel
- Slide the base between the sides into the back panel
- Slide the top between the sides, up to the back panel
- then finally slide the front between the sides upto the top panel
i would not scale the model down as the dovetails would become too tight, though it would probably safely scale up a little if you were so inclined.
I hope you enjoy.
May the Force be with you
Thanks
Bugman
If you like what I am doing please consider buying me a coffee or tipping. 😁👍
