Otto DIY alternative robot biped legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are other optional legs and feet easier to assemble for some, that you can use in your Otto robot.
- Ocena
- 4,75 / 5
- Polubienia
- 49
- Pobrania
- 488
- Wydruki
- 5
- Wyświetlenia
- 3507
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
The idea was to have a set of legs and feet that were easier to assemble and have lower center of gravity for certain balance movements like lifting one foot while standing on the other.
To complete the robot you will need to download and 3D print the Starter biped parts from here:
Otto DIY | Download free STL model | Printables.com
We invested lots of time and resources to provide open source code, software and hardware, please support this project by just giving us a ❤ Like and share and you are welcome to be a part of this friendly community of robot builders, teachers and makers. Join today our Otto Builder community