1 / 2
Champion and Un-champion trophies — zdjęcie 1
1 / 2

Champion and Un-champion trophies

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Champion and Un-champion trophies for any event

Ocena
0 / 5
Polubienia
38
Pobrania
269
Wydruki
0
Wyświetlenia
2109
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I made these trophies for our block party last year, with the idea that they stay with the winning (and losing) families until the next year. 

I glued the handles on using 5-minute epoxy, but pinned them first for strength using 3x8mm steel dowel pins. The cup is designed to survive being picked up by a handle, so far so good.

The cup is designed to be bolted to the base with a ¼-20 hex bolt, and the poop is to be tapped for ¼-20 and screwed on from below.

This silky gold PLA worked great, just don't sand it (it takes off some of the luster): https://www.amazon.com/gp/product/B06XRPYXP2

I have the original Blender file if anyone is interested.

Tagi