Wyze Cam Pan Threaded Magnetic Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's a magnetic mount I designed to work with Wyze Cam Pan. I designed this thing to attach the camera upside down…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's a magnetic mount I designed to work with Wyze Cam Pan. I designed this thing to attach the camera upside down on the duct work to keep an eye on mouse traps in the basement.
You will need a 1/2 inch Neodymium magnet to place in the print when paused. There is enough space for a 1/2 inch magnet to be loose. Do not rescale the model as the threads won't screw.
Important
- Pause the print wight before the ceiling for the magnet is printed. Any lower will cause the print head to hit the magnet.
- Use 50% or greater for threads using a support blocker.
- Cannot be used sideways.
Because Neodymium magnets are really strong, it is recommend that you super glue the magnet to the base to prevent the magnet from lifting up to the print head when the print is resumed.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10ish
Post-Printing
Magnet enclosed
Magnetic mount screwed
1/2 Neodymium magnets to fit the print
Print paused to place a magnet right before cavity is closed
Completed print
Category: Parts