Panasonic Bathroom Fan Dust Filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dust filter I created to fit a Panasonic bathroom fan, specifically for FV-05-11VK1, but will probably fit…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a dust filter I created to fit a Panasonic bathroom fan, specifically for FV-05-11VK1, but will probably fit other Panasonic bathroom fans that have a 222 mm internal fan shroud section.
It's in two pieces that mirror each other. It's designed to fit below the bracket that attaches to the plastic white frame. Model is designed for 0.4 mm nozzle FDM priners.
There is a 1.0 mm and a 0.8 mm version. 0.8 mm version has a denser grid than the 1.0 mm version. The photo shows the 1.0 mm version.
This model could have been also achieved with a solid object with top and bottom layers removed and an infill density of choice in the slicer software.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Filament:
AMZ3D PLA
Black
Notes:
Photo shows a print acquired from Ender 3 Pro on glass bed.
Pay close attention to slicer output. Make sure likes are straight and not skipped or generated as zigzagg lines. Adjust your line width to be 0.4-0.5 if that happens with the slicer you are using.
Category: Bathroom