Ender 3 Clean wipe nozzle tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was looking a proces to clean the nozzle before printing, but all the model I found didn't like 100% so I made…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 1082
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I was looking a proces to clean the nozzle before printing, but all the model I found didn't like 100% so I made myself.
You can adjust the distance between the brush & the bed and also the height.
After watching the gcode of huanghaha on his item https://www.thingiverse.com/thing:4067406 I added to my routine this gcode:
M211 S0 ;Soft endstop off
G1 X235 F4800
G1 X249.5 F4800
G1 X235 F4800
G1 X249.5 F4800
G1 X235 F4800
M211 S1 ;Soft endstop on
You need just print the item and 1 of the T-nut M3 (if you don't have, print one yourself)
For the brush, you can use a Nylon nail brush and glued on top the base.
Print Settings
Rafts:
No
Supports:
No
Infill:
10%
Category: 3D Printer Accessories