XT60H Circular Mount - Lack Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bulkhead XT60-H fittings meant for the power cables when using a LACK enclosure
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 417
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Like many, I got tired of having to undo the power wires at the power supply when I needed to work on the printer. I didn't like any of the other bulkhead type fittings for the XT60H connectors I had so I made my own. This fits 2 connectors for the 2 sets of power wires. The power panic wire I have running through a different grommet, so that still needs to be unplugged at the power supply for now.
It is sized for a 1.25" through hole, so it can easily be installed with just a step bit. For use on the LACK enclosure you will need:
- Qty 2 M3 hex nuts
- Qty 2 M3x15 (or longer) SHCS
It also is helpful to have a 40mm+ length M3 bolt to help seat the nuts