Anycubic Photon-S Homing Sensor Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer to lift Z-Axis homing sensor arm of Anycubic Photon-S SLA resin printer after installing Chitubox Mono LCD kit
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 410
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
After installing a chitubox mono LCD screen upgrade for the Anycubix Photon-S and in conjunction with a flexible build plate I found the new addition height of the LCD upgrade would cause the printer homing to fail each print due to Z-home sensor not triggering
I designed these spacers to be laser cut to shim out the Z-Axis sensor arm by about 0.4mm using takeaway chinese container as the raw material for the shims, in the end I needed 2, giving me 0.8mm, which gave me plenty of room for homing and zeroing out the Z-Axis
I have provided the DXF file so it can be laser cut.
Original Freecad file also provided if you need to make any changes