Plug for roof rack hole - Mazda 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I lost my roof rack plug and decided to design my own using OpenSCAD. This one is made so it specifically covers all…
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 298
- Wydruki
- 2
- Wyświetlenia
- 1322
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I lost my roof rack plug and decided to design my own using OpenSCAD. This one is made so it specifically covers all holes. It is little wider than original one but works correctly.
If there are some adjustments that are needed then please comment. I will check what I can do.
It is part number GJ6A505A1 for Mazda.
HOW TO PRINT:
Printing on the side is better. Use tree supports or supports that wont break small elements of the design. Infill 20-100%. Setting of infill does not affect print too much due to the size of the print.
If you want to support me please donate here: https://ko-fi.com/wakedev
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Infill:
20%
Filament:
RoHS PLA
Category: Automotive