Maze pieces for robotic mouse (by Learning Resources Code & Go)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pieces for building a maze for robotic mouse by Learning Resources Code & Go
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 123
- Wydruki
- 1
- Wyświetlenia
- 668
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
My kids got their robotic mice produced by Learning Resources Code & Go. They are very cool, but the set we got was the one basic one - without the maze pieces. I've designed my own version of these - a bit different from the original design, but still allowing kids to build all of the tracks from the original set.
Please not that my build plates will not connect to the original plates - the latch differs! This set was not meant as an extension, but as a full replacement of the original one.
Source files included (Fusion 360)
Print instructions
Prints well with PLA, 0.2mm layer (0.25mm for the tunnel speeds up the print), 4 perimeters, for the plate supports are needed for the latch to print properly
Original set consists of:
- 16 base plates
- 3 tunnels
- 40 walls (attached print file has 20 of these walls)
- 1 piece of cheese (can be downloaded here: https://www.thingiverse.com/thing:11587 - print scaled up to 400%)