Cat Toy With Rattle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have added two small balls inside the toy which makes a rattle sound. This makes it interesting for the cats. You…
- Ocena
- 4,667 / 5
- Polubienia
- 27
- Pobrania
- 256
- Wydruki
- 4
- Wyświetlenia
- 1273
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
I have added two small balls inside the toy which makes a rattle sound. This makes it interesting for the cats.Cat toy v3 have increased thickness of the sphere from 2mm to 3.2mm. Increased thickness can give more strength compared to cat toy v2.
You can print this in single step and without supports but there are two methods.
EASY METHOD > I have uploaded gcode for ender 3 printer with temperature 205 and speed 50. This has all supports with correct orientation. you can download that and print with tuning the temperature and other parameters during printing from printer.
EXPERT METHOD > I have used Cura and I can guide you on how to print this object in that. You have to install custom support cylinder plugin from market place. Then open 3mf model in it and then make sure that the cone which is at the base and the cylinders connecting the balls are printed as supports. Use Brim type adhesion. Change wall count to 4 so, which will avoid useless infill in the narrow walls.
Finally you have to cut the supports that of the balls to make them free and tumbling inside the shell. Try to cut the base of the small balls so that the balls wont have any support protruding.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Infill:
15
Category: Pets