SPD Bicycle Cleat Adjust Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Design is intended to allow more repeatable accurate adjustments of SPD (MTB) shoe cleats.
- Ocena
- 5 / 5
- Polubienia
- 108
- Pobrania
- 582
- Wydruki
- 5
- Wyświetlenia
- 3215
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Design is intended to allow more repeatable accurate adjustments of SPD (MTB) shoe cleats.
Not necessary but embossed text looks better if you do a colour change at 0.8mm Z height and a change back at about 1.4mm {Note the slicer photo attached is a MMU type colour change - you can do colour change without the MMU) .
Appreciate feedback / suggestions to improve.
Length of the tool was largely determined by my print plate and my size 43 shoe :)
There are plenty of You_tubes on cleat adjustment to give options on best setup.
Need to rotate print 45° for a 200 x 200 print plate. If you do you may wish to change the infill angle as well to 45°.
Print is designed to have the Text side down on the print plate.
I used PLA (eSun ) with 0.2mm layers. No supports or rafts are required