Spyro the Dragon (poses: Okay 👌) monochrom
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As I was asked on how to print this one in one color I made a short remix for single material printing.
- Ocena
- 4,5 / 5
- Polubienia
- 26
- Pobrania
- 231
- Wydruki
- 2
- Wyświetlenia
- 1390
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As I was asked on how to print this one in one color I made a short remix for single material printing.
In the set:
- Body (scale to 400% OR 230%)
- Wings separated for less supported printing
- 2 sets of Wings (please see Print instructions for further information)
Print instructions
First you have to decide if you want a very big Dragon which need almost your full Z height or a hand tame small Dragon.
For the big Dragon:
Load the body and scale it to 400%
Load the Wings and also scale them to 400%
arrange it on your print bed and enable support.
For the small hand tame Dragon:
Load the same body and scale it to 230%
Load the Wings with "thicker" in the filename and scale it to 230%
Why using the thicker wings? Because otherwise you will have issues with thin walls and gaps in the model.