Z-Axis Cable Management Cover for Elegoo Neptune 2S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tidy up the messy Z-Axis cables without needing fasteners, supports an optional cable chain!
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 544
- Wydruki
- 7
- Wyświetlenia
- 3677
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to clean up the Z-axis wires on my Neptune 2S, they've touched the table and lead screw during a print before. This cable cover has a nice pressure fit, but also the filament detector screws can be used to fasten it. I use it together with a 10mm x 11mm (W x H) inner 17.5mm x 15mm (W x H) outer cable chain. Sorry I used a salvaged chain so don't have my own print file.
Use with this bracket: https://www.printables.com/model/219960
Printed well in PLA+ with these settings:
2 walls
0.2mm layer height
10% infill
A little bit of support for the slots and area above the filament detector
Here is a video if you want to relax and watch it assembled to some laid back music: