Tiny OpenScad Compliant Grabber Ver 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A second remix of Flexy Pliers by Cisco in OpenScad swapping out pins for compliance (A small version)
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 167
- Wydruki
- 6
- Wyświetlenia
- 668
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This is a remix of Cisco's Flexy Pliers
Its all done in OpenScad so it can be adjusted
I also removed the pins and replaced with compliant mech and it seems to work :)
In this ver 2 I removed the second set of pins since I am trying to print them quicker to hand out.
This is a smaller version I made see https://www.printables.com/model/218810-openscad-compliant-grabber
For the big size
I wanted to make a smaller one so I could print them quickly so I can hand them out at my upcoming homeschool conference.
Printing at 0.2 layer height Fast to get one in ~ 34 min