1 / 1
Taller Foot for xTool M1 - 20mm, 30mm, 40mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A taller foot for the base of the xTool M1 laser/blade cutter
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 232
- Wydruki
- 1
- Wyświetlenia
- 929
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (60)Powiązane
I made these larger feet for the xTool M1 so that I could fit an air filter underneath the machine. I modelled them to have the same top and bottom diameter as the original feet so it should be a drop-in replacement.
You can try to pry the washer out of the original foot, or use a standard M4 washer in there. Use the original M4 bolts that come with the machine to put it in place.
I printed it in TPU, but you could print in PLA as well.