Zerode Katipo Rear Brake Hose Gearbox Bolt Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small clip for holding the rear brake hose away from the frame by the bottom bracket on a Zerode Katipo
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
The brake hose was rubbing on the frame between where the rear brake hose goes from the rear triangle clips to the main frame. There was no way to stop this happening so I made a clip that holds the brake hose away from the frame and keeps all that nice paint intact.
I didn't want to mess with the bolts that hold the gearbox in so the clip holds the hose with a cable tie and attaches to the head of one of the gearbox bolts. It is both friction fit over the bolt head and also has been designed for a 6x1.5mm magnet to be printed into the part for extra holding power. May also work on a Zerode Taniwha but hasn't been tested.
If you are also looking for a solution for the brake hose rubbing at the top of the frame by the headset I have designed a custom bracket to fix that as well here.