Angled Vertical Foregrip MLOK
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Vertical Angled foregrip styled after the MLOK BCM Mod 3. There will be several versions available. The only…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 1456
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Vertical Angled foregrip styled after the MLOK BCM Mod 3. There will be several versions available. The only model released currently has the same angle as the FGC-9's magwell and fits nicely around the barrel retainer. It works well using fuzzy skin 1cm below the top of the grip.
Print Settings
Supports:
Doesn't Matter
Notes:
I used Cura fuzzy skin and support blockers to put the stippling on.
The fuzzy skin setting I used were:Thickness: 0.3
Density: 6.0
Point Distance: 0.1667
I used two walls and 15% infill but it should be strong enough with any infill.
Category: Parts