Toy Catapult
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adjustable-power desktop catapult using a hair elastic for propulsion
- Ocena
- 5 / 5
- Polubienia
- 85
- Pobrania
- 389
- Wydruki
- 4
- Wyświetlenia
- 3100
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This miniature catapult uses a standard hair elastic to propel either the included dodecahedron, or a ping-pong ball using the swappable ammo baskets. The printed screw adjusts the power by pulling the elastic tighter or looser, with a numeric gauge along the sides so you can track the trajectory.
The trigger part (and some of the base part) needs supports as shown, for which I've included a support enforcer in the .3mf file. The screw part needs to be printed upright for the threads to work, so I modeled a custom support structure that keeps it sturdy, but can then be clipped off easily.
The little spring component of the trigger ensures that the arm is pushed well over-center of the pivot/elastic axis. Together with the catch, they should load the spring a bit before releasing the arm, giving it a good shove as the elastic starts pulling.
Holes in the base part can be used to screw it down to a piece of wood, or another printed base that allows for angular adjustment!