Tomica Ferrari F40 Display Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The display is designed for Tomica Premium Ferrari F40.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 122
- Wydruki
- 1
- Wyświetlenia
- 1212
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068
Custom display base are also available from $5! Contact me to discuss what you want!
If you like my work, you can support me Printables Clubs! Just click the “Support & Join” button beside my name or here: https://www.printables.com/@GigaPenguin#join:279
Exclusive models are included too!
You can also support me through Patreon too: https://www.patreon.com/gigapenguin3dprints/posts
Description
The display is designed for Tomica Premium Ferrari F40. If you want the base to fit a different F40 casting please send me the dimensions indicated here: https://imgur.com/5T6mb2L
The display base is separated into 2 parts for easy printing and colour swap. The parts are:
1) Base
-BaseV3.STL
*BaseV2.STL (alternate for easy printing)
2) Base back wall:
-BoxBackAssem.STL
Print Settings
Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "BaseV3" & "BaseV2":
1) Start (Overall base colour, mine is in white)
2) Layer 26 (Ferrari 75th anniversary logo colour, mine is in black)
Filament change layer for colours on "BoxBackAssem":
1) Start (Overall background colour and center stripe in Ferrari logo, mine is in white)
2) Layer 9 (Lower stripe in Ferrari logo, mine is in red)
3) Layer 14 (Upper stripe in Ferrari logo, mine is in green)
4) Layer 19 (Ferrari logo background colour, mine is in yellow)
5) Layer 24 (Ferrari logo outline, overall detail and F40 lettering colour, mine is in black)
Assembly
The car is tied by wires through the hole in the base
Back plate should slide in nicely into the display base.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/