1 / 7
Computer  Monitor Cold shoe and 1/4 -20 mount for Cameras and microphones — zdjęcie 1
1 / 7

Computer Monitor Cold shoe and 1/4 -20 mount for Cameras and microphones

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This design is made to attach to the back of an Vesa MIS D monitor. It will work with most computer monitors as long…

Ocena
0 / 5
Polubienia
10
Pobrania
40
Wydruki
0
Wyświetlenia
1319
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

This design is made to attach to the back of an Vesa MIS D monitor. It will work with most computer monitors as long as it has the 100 x 100 mm holes in the back.

This will allow you to attach a cold shoe device like a microphone to the top of your monitor

I also included 5.5mm holes on top so you could screw 1/4 -20 devices on the top for other cameras, lights ect. Be sure to use a 1/4 - 20 screw on a power driver to tap the hole.

i have included two lengths one for a small monitor and one for a larger (taller) monitor

the smaller one is 100mm from the top hole on the vesa mount

the larger one is 150mm from the top hole on the vesa mount

i am working on a new version that will have an adjustable height and will print in two parts to accommodate a smaller print bed

Category: Electronics

Tagi