1 / 1
MK3S/MMU2S R4 Extruder motor plate with extra tensioner screw — zdjęcie 1

MK3S/MMU2S R4 Extruder motor plate with extra tensioner screw

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Solve the noise generated by the bondtech gears during filament change process on the MK3S/MMU2S.

Ocena
0 / 5
Polubienia
1
Pobrania
59
Wydruki
0
Wyświetlenia
1117
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Solve the noise generated by the bondtech gears during filament change process on the MK3S/MMU2S.

https://forum.prusaprinters.org/forum/original-prusa-i3-mmu2s-mmu2-hardware-firmware-and-software-help/loud-clicking-from-bondtech-gears-while-loading-unloading/

This mod add a second tensioner screw to re-center pressure in line of the filament pass.

Use the previous MK3 extruder tension springs (soft), don't mix them with the MK3S single spring (hard).

Print instructions

PRUSA PETG 20% infill 3 perimeters, gcode provided for MK3/MK3S single mode

Tagi