LowRider2 Belt Stop Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A table obstruction prevented me from moving the LR2 side assemblies further onto the table so I moved belts out further
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An underside table obstruction prevented me from easily moving the LowRider2 CNC (see http://v1engineering.com ) side assemblies further onto the table in order to make my Y belts parallel so I made this spacer to go under the four belt stops to move the side assemblies closer to the edge of the table instead.
This spacer is 14mm wide which puts the wheels right on the edge of the table so scale down in the Z axis to make as thin as necessary if you notice your belts are not parallel to the table or to clear an under table obstruction and only if you are OK with the LR2 wheels being closer to the edge of the table.
It is designed to work with this belt tensioner which I believe has the same holes as the original tensioner that used zip ties…:
https://www.thingiverse.com/thing:4552761
This part can be flipped physically so only this one STL file is needed for any of the belt stops.
Enjoy!
Category: Robotics