1 / 2
Voron V2/VT 7" Display Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick and easy mount for a BTT PiTFT70
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 293
- Wydruki
- 0
- Wyświetlenia
- 3364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (58)Powiązane
This is a simple mount for the BTT PiTFT70. All parts should be printed in Voron-Spec, no supports needed. STLs are oriented the correct way, no need to change stuff around.
BOM:
- 1x M3 T-Nut/Hammerhead Nut
- 1x M3x8mm SHCS
- 2x M5 T-Nut/Hammerhead Nut
- 2x M5x10mm BHCS
- 4x M2,5x14mm BHCS OR 4x any M2,5 longer than 6mm
- 1x PiTFT70
- 1x Flat Flexible Cable 50cm or longer for Pi Cam/Pi Display
Print Settings
- 4 Walls
- 5 Top/Bottom Layers
- 40% infill
- 0.2 Layer height
Installation
- Attach the 2 Mounts to the Frame with the M5 screws, feed the Cable through the Slot in the middle Skirt and mount it with the M3 screws.
- Feed the Cable through the back of the Housing and attach it to the Display (unisolated part faces display). Use the Raspberry Mounts to attach the Display/Housing to the Frame.
- Simply Push the Front Housing onto the back, it should fit
- Connect the FFC to the Pis Display port (unisolated part faces towards USB).
- Install Klipperscreen via KIAUTH or by doing it manually.
- If the Display is flipped upside down, hit the toggle switch. Adjust the brightness as needed.
FFC Routing
CAD-Files can be found on the voronuser_mods github