STARGATE Naquadah-Generator / Naquadah Reactor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my model of the STARGATE Naquadah-Generator / Naquadah Reactor. I designed it form pictures online, so it is…
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 1258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
This is my model of the STARGATE Naquadah-Generator / Naquadah Reactor. I designed it form pictures online, so it is not super exact. I designed this for fun and it´s my first project like this, so don’t be to hard on me. I only printed out a 50% scale version of it to test it, and had a few problems with the rigidity of some of the parts, but with scaling it up, there shouldn’t be a problem anymore.
I printed everything with an Anycubic Mega S with an infill of 15%.
In order to print it, you have to print out the following:
- 1x main_body.stl (silver)
- 1x energy_core.stl (silver)
- 2x zylinder.stl (blue)
- 2x globe.stl (silver)
- 16x clamp.stl (silver)
- 8X rod_1.stl (silver)
- 2x rod_2.stl (blue)
- 4x connector_1.stl (silver)
- 4x connector_2.stl (silver)
- 6x connector_3.stl (any color, not visible)
Note: The picture is a first look at the model without low effort as a "proof of concept".
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
15
Filament: Geeetech PLA White and Blue
Category: Props