Icarus 2.1 ribbon cable holder upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an upgrade for those wanting to upgrade from Icarus 2.0 to 2.1 and want the new ribbon cable holder.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 817
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an upgrade for those wanting to upgrade from Icarus 2.0 to 2.1 and want the new ribbon cable holder but don't want to reprint the whole carriage.
To do so, cut off 42.0 mm from the old ribbon cable holder and glue this new part in place using super glue, it should be just as strong as the original part.
This is mostly for printers with a coupler on the Y motor that interferes with the ribbon cable as the printer homes.
Picture: Olaf Krause
Support
All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)