Orbiter v2.0 ender 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Orbiter v2.0 mount should work with any ender 3 style mounting bracket and any style duct as long as it's NOT higher…
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 325
- Wydruki
- 3
- Wyświetlenia
- 2861
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Orbiter v2.0 mount should work with any ender 3 style mounting bracket and any style duct as long as it's NOT higher than the ender 3 style mounting bracket. I don’t recommend printing in pla as it will likely crack. Petg and stronger is fine
Post-Printing
Orbiter v2.0 mount for ender 3 and any creality with ender 3 style mounting bracket
You will need two m3 heat inserts. It mounts behind the ender 3 mounting bracket between the bracket and wheels. Use the stock steel spacers and press into orbiter mount. It's designed to be a rather tight fit so use a good amount of pressure to push them in. Also will need a small piece of bowden tube from orbiter to hotend. Enjoy!
Category: 3D Printer Parts