Netgear Nighthawk MR100 Hotspot Cooler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cooling case for the Netgear MR 1100 Hotspot sold by att. This hotspot overheats easily, this cooler keeps it going.
- Ocena
- 4 / 5
- Polubienia
- 10
- Pobrania
- 144
- Wydruki
- 1
- Wyświetlenia
- 2011
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
The Netgear MR 1100 hotspot gets hot very easily, and shuts down. This Cooling case is designed to keep it cool even when under heavy load. A small 40mm noctua fan is attached to the bottom of the case and is powered by the USB A output from the MR 1100. A right angle usb A connector is used to connect the fan to the usb a outlet. Cut the female side of the connector off and connect the Black and Red wires from the USB A male side to the corresponding black and Red wires of the Noctua 40mm fan. The fan runs completely silent using a small amount of power. It can run off the MR100 battery, or while connected to USB C power.
Needs 4 x 3.0 x 14mm cap screws to attach the fan to the bottom
See Amazon photos for the fan and the usb connector
Items need to complete
USB connector on amazon https://amzn.to/3mlaOte
5 Volt, 40mm Noctua fan on amazon https://amzn.to/3zgTwVO
3.0 x 14 mm Cap screws x 4 https://amzn.to/3mihV5s
Link to router on Netgear.com https://www.netgear.com/home/mobile-wifi/hotspots/mr1100/