1 / 3
Backpack Trekking Pole Mount Attachments
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a lightweight day pack but very few of them offer trekking pole attachments and the ones that do are large…
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 1821
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (69)Powiązane
I wanted a lightweight day pack but very few of them offer trekking pole attachments and the ones that do are large and expensive.
I did find a solution to add mounts to a pack but it was just as expensive as opting for the larger packs instead of a small one.
So I decided to make my own.
Other Parts Needed:
- 4' or more of 3mm Elastic Band
Band will need to be cut into 4 pieces of 12 inches or your preferred length - 4 Cord Locks
I only had the single hole locks laying around but double locks would be preferred for a better hold
What to Print:
- 4 Cord Band Lock Mounts
Print instructions
I recommend printed this with PETG at 0.15 layer height, without supports.