Printed Tables Remix for PaScn3D Mk.0 - 3D Scanner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed tables for the excellent PaScn3D Mk.0 - 3D Scanner by Tomasz P. to use in place of filament spools.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 1628
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I didn't have the filament spools as in the original design and it was taking too much time to retrofit for spools I had. It took less time to draw and print tables. I created a camera table (with holes for screws to attach to part E12R1) and a target table. The camera table sits on part E7R1 and the target table sits on part E9R1 (which sits on part E8R1) when rotating the camera around the target. The target table also sits on part E7R1 when rotating the target with a stationary camera on a separate tripod.
Print both tables with the flat side down. Both parts were printed at 0.2mm and 5% infill to save time and filament. I used supports for the camera table screw holes which were easily removed.