Speedy Stitcher Storage Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted a box to stop my speed stitcher, needles and bobbins rattling around in the bigger toolbox so decided to make…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Wanted a box to stop my speed stitcher, needles and bobbins rattling around in the bigger toolbox so decided to make this.
It fits into a large Stanley Fat Max tray, but it's not a tight fit so it can be lifted out when needed.
It will hold 4 bobbins, plus the one in the Stitcher itself and there's a slot for spare needles too. So should be enough for most people.
If you want it more secure (for storing on a boat, truck or trailer) Just use an elastic band!
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.3mm
Infill:
15%
Notes:
I print at the slightly slower 50mm/s vs 60mm/s for good adhesion and cleaner lines.
Post-Printing
You may need to do a little work on the lid mounting pins. At 0.3mm the holes needed opening a little and some light sanding on the pins themselves. At a finer resolution this probably isn't necessary but it was 2 minutes of dressing vs an extra 4 hours of printing.
Category: Tool Holders & Boxes