1 / 1
BetaFPV cetus pro printable landing feet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cool little 3D print to add little and light landing feet to the BetaFPV cetus pro tinywhoop drone!
- Ocena
- 4,667 / 5
- Polubienia
- 17
- Pobrania
- 247
- Wydruki
- 2
- Wyświetlenia
- 3138
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (21)Powiązane
Nice little 3D print to add little and light landing feet to the BetaFPV Cetus pro tinywhoop drone!
Made to press-fit between the 3 protruding edges and print with the pointed part up. Gives around 4.5mm extra ground clearance.
Depending on the accuracy of your 3D printer, you might need to scale the print 1 or 2 percent to let it fit perfectly.
Made with a small contact patch, so the whoop will slide when hitting hard surfaces.
Will upload foto's soon.