TemTem Card (multicolor for single extruder)

With the official release of TemCard coming up in September, I decided to make a TemTem card, printable in color with a single extruder. Designed in Fusion 360 (.f3d and .step files included if anyone wants them, don't judge the mess please).

I wanted to be able to print all the accents in a single print, so I added a box to raise the shortest accent (bottom triangle) so that the color change height would match. 

There is a small gap between the support, so the “lower accent color change 10mm” must be printed at  .15mm layer height in order for the accent to not fuse to the base structure. Be careful when removing it regardless, so it doesn't break. If you're worried, you can always print this piece separately or use the supplied .gcode which is 1.5x scale)

I used black for the first layers of the accent, then white. For the card itself I used a very old spool of PolySmooth transparent, hence the weird coloring in the photos (smoothing failed miserably but I still like the affect)

Supplied .gcode is for a 1.5x scale version in PLA. If you're slicing this yourself, please use the third image as reference for the correct orientation. The color change should be at 10mm for the 2x upper corner pieces, and 8mm for the lower piece.

I'm working on a version for the collapsed/inactive version of the card as well, though getting the angles perfect is taking some time. 

I know this is a super niche model so if you enjoy it I'd love to see your print and get feedback! :)