Roundnet Repair (Spikeball clone)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Repair for roundnet
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 725
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
My roundnet(spikeball clone) broke where its inserted into the legs. So i modelled a piece that can be glued on.
Theres a couple different ones. The v1 broke after some games due to small wall taking the load. The new versions has a middle thing.
V2 were to long in the middle support for where mine broke.
V3 hasent been tested but is just a little shorter.
V4 is the shortest and is the one im using. Thing broke. But found that i only printed in in like 20% infill. (Big mistake). From this i have designed the V5.
V5 is just the V4 with the possibility to add a M3 bolt and nut. Going to print this in 80-100%.
Printed in PETG 0.15 layerheight. I printed with supports. Facing the MB down towards the bed.