ULTiM8x8 modular, no-solder, RGB LED half cube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ULTiM8x8 modular, no-solder, RGB LED cube.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 875
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
ULTiM8x8 modular, no-solder, RGB LED cube. Get yours here: http://wyolum.com/ultim8x8/
Print the half cube, or print three faces and glue them together.
Mount the LED panels to the cube using the screws included with the ULTiM8x8. I used crimp connectors to wire the LEDs, but you could probably just use washers and wrap the wire around the screws before attaching them.
I created this in Fusion 360 using this file for the hole placement: https://github.com/wyolum/ultim8x8/blob/master/fabricate/ultim8x\_cube02/cube02\_outerface.svg
Print instructions
Category: Electronics Print Settings
Printer Brand: Wanhao
Printer: Duplicator 6
Rafts: Doesn't Matter
Supports: Yes
Resolution: .15
Infill: 20
Notes:
I used supports because the Duplicator 6 isn't great at bridging the tops of the holes. With other printers, or with better part cooling, supports are probably not needed.