Water Bottle Dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of scmake's dryer https://www.thingiverse.com/thing:4579574. I loved the aesthetic of the original but…
- Ocena
- 4,919 / 5
- Polubienia
- 310
- Pobrania
- 1908
- Wydruki
- 43
- Wyświetlenia
- 6487
- Oceny
- 37
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a remix of scmake's dryer https://www.thingiverse.com/thing:4579574. I loved the aesthetic of the original but found it was a little unstable with a bottle fitted and scaled down prints for small bottles were too fragile to be useful.
So I redesigned it with industrial strength while keeping the great style of the original. The base is wider and the object has more weight lower down for stability. The stand itself is solid while providing the same look and excellent drainage as the original.
Print Settings
Printer Brand: Wanhao
Printer: Wanhao Duplicator i3 Plus
Rafts: No
Supports: No
Resolution: 0.32
Infill: 20%
Filament: eSun ABS Grey
Notes:
The print is tolerant of almost any setting and needs no support or brim/raft and needs no glueing. Use a smaller layer height if you want a cleaner look.
Rescale in your slicer for use with different bottle sizes. The default size suits a 30mm bottle neck.
The 30mm neck bottles we have actually need a print at 97% because of a narrowing deep in the throat and we have 40mm neck bottles which need a print at 130%.
Category: Kitchen & Dining