Dishdrawer Rack Brace
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fisher & Paykel Dishdrawer dishwashers have a collapsible rack which is held open by a fragile lock. When the lock…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Fisher & Paykel Dishdrawer dishwashers have a collapsible rack which is held open by a fragile lock. When the lock breaks the rack becomes effectively unusable and plates have to be strategically arranged to stop the racks from falling over. This brace slides over two of the rack tines to keep the rack open and usable.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
Yes
Supports:
No
Resolution:
0,2mm layer 0.6mm line (0.4mm nozzle)
Infill:
100%
Filament: Polymaker Lite ABS 235C extruder 90C bed 40C enclosure Grey
Notes:
If your Cartesian moving bed printer has trouble with the brace falling over when printing, try reducing the moving bed acceleration (usually Y axis) significantly. For tall narrow objects like this I use 1000mm/s^2 for X axis and 100mm/s^2 for Y axis with jerk of 1.0 for each.rnrnIf you trouble with bed adhesion due to the height leverage, try setting the raft first layer line separation = line width. Normally (in Cura) the raft only provides 50% first layer coverage. Also try reducing the raft air gap to 0.1mm.
Installed brace
Category: Replacement Parts