OWIM Lidl Screwdriver & 30 bit set #Gridfinity holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity holder for a cheap screwdriver set I use quite often
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 97
- Wydruki
- 3
- Wyświetlenia
- 1909
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Design description
This is a gridfinity holder for a cheap Lidl (shop) screwdriver and its 30 bits, created by OWIM.
Only after printing I noticed I added a row too much to load bits.
I can only find the renewed(?) model online: OWIM Precision Mechanics Tool Set 5 Pieces, which probably won't fit.
Also holds the extension bit and included magnifier glass (which I lost, so untested).
Based on ZachFreedmans gridfinity design system and used the iFixit Gen 2 Holder as a starting point. I didn't include a spot for the nipper and tweezer as I would use these models by ZachFreedmans for it: nippers & tweezers.
This uses a 4x2 grid size.
Gridfinity description
Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop storage system - multiple options to fit your machine shop!
Gridfinity Tips!
- No brims or support required!
- Use any filament with an 0.6mm or smaller nozzle.
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.
Gridfinity is the ultimate organizer for your whole workshop! Learn more at